Packages

elixir_ale

1.2.1
1.2.1 1.2.0 1.1.0 1.0.3 1.0.2 1.0.1 1.0.0 0.7.0 0.6.2 0.6.1 0.6.0 0.5.7 0.5.6 0.5.5 0.5.4 0.5.3 0.5.2 0.5.1 0.5.0 0.4.1 0.4.0 0.3.0 0.2.0

Elixir access to hardware GPIO, I2C, and SPI interfaces.

HexDocs Report package

Current section

25 Dependants

Jump to
Documentation
License
23 Versions
1 Dependency
25 Dependants
Files
Activity

Packages depending on elixir_ale

25 packages
  • ina219 v2.0.1 requires ~> 1.2

    Provides a driver for INA219-based voltage and current sensors connected via I2C

    Updated about 2 years ago

    502
    recent downloads
  • pca9641 v2.0.4 requires ~> 1.2

    Driver for PCA9641 2-channel I2C bus master arbiter chip

    Updated 4 months ago

    362
    recent downloads
  • grovepi v0.6.1 requires ~> 1.0

    Use Dexter Industries' GrovePi+ and GrovePiZero boards and many Grove sensors.

    Updated about 8 years ago

    241
    recent downloads
  • rfm69 v0.2.0 requires ~> 1.0

    RFM69 is a library to handle sub-GHz wireless packet communication via an RFM69 chip.

    Updated about 8 years ago

    212
    recent downloads
  • mpl3115a2 v1.0.2 requires ~> 1.2

    Driver for the MPL3115A2 altimeter connected via I2C.

    Updated 7 months ago

    211
    recent downloads
  • subg_rfspy v2.0.0 requires ~> 1.0.1

    SubgRfspy is a library to handle sub-GHz wireless packet communication via a TI cc1110 chip running subg_rfspy.

    Updated about 8 years ago

    211
    recent downloads
  • nerves_grove v0.5.0 requires ~> 0.5.5

    Grove module support for Nerves.

    Updated about 10 years ago

    180
    recent downloads
  • max1704x v0.1.1 requires ~> 1.2

    Driver for the MAX17040 and MAX17041 lithium battery monitoring ICs

    Updated about 2 years ago

    179
    recent downloads
  • ex_lcd v0.4.0 requires ~> 0.6.1

    Hex package to use character matrix LCD displays including HD44780 in your Elixir/nerves projects. Uses elixir_ale for IO.

    Updated about 9 years ago

    166
    recent downloads
  • exred_node_picar v0.2.3 requires ~> 1.0

    Exred node to control a SunFounder PiCar

    Updated about 7 years ago

    152
    recent downloads
  • motor_hat v0.6.1 requires ~> 0.4.0

    Elixir implementation of the pyhton motor_hat library from Adafruit for there motor_hat board. Library: https://github.com/adafruit/Adafruit-Motor-HAT-Python-Library Board: https://www.adafruit.co...

    Updated about 10 years ago

    145
    recent downloads
  • ssd1306 v1.0.1 requires ~> 1.2

    Provides a driver for SSD1306-based monochrome displays connected via I2C

    Updated about 2 years ago

    137
    recent downloads
  • elixir_max72xx v0.1.2 requires ~> 0.6.1

    Hex package to use 8x8 LED matrix or 7-segment displays with MAX72XX microchip in Elixir/Nerves projects. Uses elixir_ale SPI protocol for communication

    Updated about 9 years ago

    113
    recent downloads
  • exred_node_gpio_out v0.2.1 requires ~> 1.0

    Sends data to a RaspberryPi GPIO pin

    Updated about 7 years ago

    109
    recent downloads
  • rtc_ds3231 v0.1.2 requires ~> 1.0

    A library to read a DS3231 Real time clock module I've only tested this with a raspberry pi a+ and a sunfounder ds3231 board.

    Updated about 8 years ago

    104
    recent downloads
  • exred_node_gpio_in v0.2.0 requires ~> 1.0

    Reads data from RaspberryPi GPIO pins

    Updated about 7 years ago

    96
    recent downloads
  • ale_axp209 v0.2.0 requires ~> 0.5.7

    AXP209 PMIC interface for Elixir (C.H.I.P. Power Management IC)

    Updated about 9 years ago

    88
    recent downloads
  • lora v1.0.1 requires ~> 1.2

    This is a module for transmitter data using LoRa Radios. Radios: Semtech SX1276/77/78/79 based boards.

    Updated about 6 years ago

    87
    recent downloads
  • sht31gs v0.1.1 requires ~> 0.6.2

    An application to demonstrate how one might write an OTP-compliant GenServer Application for an IoT device accessed with ElixirALE

    Updated about 9 years ago

    81
    recent downloads
  • bno055 v0.0.1 requires ~>0.4

    OTP application for reading the BNO-055 absolute orientation sensor. Euler angles are read at 20hz and published to a configured local `gproc` property.

    Updated about 10 years ago

    75
    recent downloads
  • hmc5883l v0.5.0 requires ~>0.4

    OTP application for reading the HMC5883L 3-axis magnetometer. Magnetic heading is read at approx. 13hz (every 75ms)

    Updated about 10 years ago

    64
    recent downloads
  • ht16k33 v0.1.0 requires ~> 1.0

    Module to control the LED-Backpack HT16K33 by Adafruit over I2C. Including Submodules to controll specific Adafruit LEDs lik the Seven Segment Display.

    Updated about 8 years ago

    64
    recent downloads
  • ledx v0.0.1 requires ~> 0.4.0

    Ledx is a simple library for interfacing with LEDs on embedded platforms.

    Updated about 10 years ago

    61
    recent downloads
  • sht3x v0.1.0 requires ~> 1.0

    Elixir driver for the SHT3x (SHT30, SHT31, SHT35) series temperature and humidity sensors from Sensirion.

    Updated about 8 years ago

    59
    recent downloads
  • tcs34725 v0.0.1 requires ~> 0.5.2

    Read CRGB data from TCS34725 sensors over I2c!

    Updated about 10 years ago

    57
    recent downloads
25 packages of 25 total

Checksum

Dependency Config

mix.exs

rebar.config

Gleam

erlang.mk

Package Details

Downloads Last 30 days, all versions
0 20 40 60 80

this version

52 443

yesterday

0

last 7 days

139

all time

107 425

Last Updated

Nov 14, 2018

License

Apache-2.0

Build Tools

mix make

Publisher

fhunleth fhunleth

Links

Owners