circuits_spi

Wafer is an Elixir library to make writing drivers for i2c and SPI connected peripherals and interacting with GPIO pins easier.

Published about 6 years ago

Use character liquid crystal display (LCD) in Elixir

Published about 5 years ago

Simulated hardware for Elixir Circuits

Published about 2 years ago

OLED is a library to manage the monochrome OLED screen based on chip SSD1306. Implements a Scenic driver but also set of graphic primitves to work standalone.

Published about 6 years ago

A small library to easily control an LED strip with nerves (or nerves-livebook)

Published about 3 years ago

ILI9486 Elixir driver

Published about 4 years ago

Develop on embedded devices with Livebook and Nerves

Published about 3 years ago

ST7789 Elixir driver

Published about 4 years ago

A library to drive the Inky series of eInk displays from Pimoroni. Ported from the original Python project, all Elixir.

Published about 6 years ago

A library for interfacing with SSD1322 based OLED displays

Published about 6 years ago

Scenic render and input driver for Waveshare display HAT for Raspberry PI

Published about 6 years ago

Elixir driver for PCD8544 based LCD displays

Published about 7 years ago

An Elixir library for working with MCP300X family of ADCs

Published about 7 years ago

Library for receiving/transmitting data over nRF24L01+ transciever.

Published about 3 years ago

This is an Elixir library for the π Relay Plate. https://pi-plates.com/product/relayplate/

Published 5 months ago

A driver for working with the Max31865 RTD amplifier and a PT100 or PT1000. Still a WIP but probably perfectly fine for most hobbyist needs.

Published about 3 years ago

Max72XX is a library for driving arrays of MAX72XX as a pixel device.

Published about 6 years ago

This library allows interfacing with the MCP3008 analog to digital converter module on a Raspberry PI.

Published about 5 years ago

Interface for reading data from a windspeed sensor

Published about 6 years ago