Packages

nerves_system_rpi

2.0.2
2.1.0 2.0.4 2.0.3 2.0.2 2.0.1 2.0.0 2.0.0-rc.3 2.0.0-rc.2 2.0.0-rc.1 retired 2.0.0-rc.0 retired 1.33.1 1.33.0 1.32.0 1.31.4 1.31.3 1.31.2 1.31.1 1.31.0 1.30.1 1.30.0 1.29.1 1.29.0 1.28.1 1.28.0 1.27.1 1.27.0 1.26.0 1.25.1 1.25.0 1.24.1 1.24.0 1.23.2 1.23.1 1.23.0 1.22.2 1.22.1 1.22.0 1.21.2 1.21.1 1.21.0 1.20.2 1.20.1 1.20.0 1.19.0 1.18.4 1.18.3 1.18.2 1.18.1 1.18.0 1.17.3 1.17.2 1.17.1 1.17.0 1.16.2 1.16.1 1.16.0 1.15.1 1.15.0 1.14.1 1.14.0 1.13.3 1.13.2 1.13.1 retired 1.13.0 1.12.2 1.12.1 1.12.0 1.11.2 1.11.1 1.11.0 1.10.2 1.10.1 1.10.0 1.9.2 1.9.1 1.9.0 1.8.2 1.8.1 1.8.0 1.7.2 1.7.1 1.7.0 1.6.3 1.6.2 1.6.1 1.6.0 1.5.1 1.5.0 1.4.0 1.3.0 1.2.1 1.2.0 1.1.1 1.1.0 1.0.0 1.0.0-rc.0 0.20.0 0.18.0 0.17.1 0.17.0 0.16.1 0.16.0 0.15.0 0.14.0 0.13.0 0.12.0 0.11.0 0.10.0 0.9.1 0.9.0 0.7.0 0.6.1 0.6.0 0.5.2 0.5.1 0.5.0 0.4.1

Nerves System - Raspberry Pi A+ / B+ / B

HexDocs

Current section

Files

Jump to
Readme
117 Versions
3 Dependencies
Dependants
Files
Activity
nerves_system_rpi rootfs_overlay etc boardid.config
Raw

rootfs_overlay/etc/boardid.config 

# boardid.config



# Please consider using an ATECCx08 or NervesKey rather than storing serial

# numbers in U-Boot environment blocks. Override this file in your project's

# rootfs_overlay directory and uncomment the following line if you go this

# route:

# -b nerves_key -f /dev/i2c-1



# Uncomment to use the Raspberry Pi's preprogrammed WiFi MAC address as the

# serial number.

# -b rpi_wlan0



# Read the serial number from the U-boot environment block. The variable

# "nerves_serial_number" is the desired variable to use. "serial_number" is

# checked as a backup.

-b uboot_env -u nerves_serial_number

-b uboot_env -u serial_number



# Default: use the the RPi's unique ID as the serial number.

-b rpi