Packages

nerves_system_rpi

2.0.2
2.1.0 2.0.4 2.0.3 2.0.2 2.0.1 2.0.0 2.0.0-rc.3 2.0.0-rc.2 2.0.0-rc.1 retired 2.0.0-rc.0 retired 1.33.1 1.33.0 1.32.0 1.31.4 1.31.3 1.31.2 1.31.1 1.31.0 1.30.1 1.30.0 1.29.1 1.29.0 1.28.1 1.28.0 1.27.1 1.27.0 1.26.0 1.25.1 1.25.0 1.24.1 1.24.0 1.23.2 1.23.1 1.23.0 1.22.2 1.22.1 1.22.0 1.21.2 1.21.1 1.21.0 1.20.2 1.20.1 1.20.0 1.19.0 1.18.4 1.18.3 1.18.2 1.18.1 1.18.0 1.17.3 1.17.2 1.17.1 1.17.0 1.16.2 1.16.1 1.16.0 1.15.1 1.15.0 1.14.1 1.14.0 1.13.3 1.13.2 1.13.1 retired 1.13.0 1.12.2 1.12.1 1.12.0 1.11.2 1.11.1 1.11.0 1.10.2 1.10.1 1.10.0 1.9.2 1.9.1 1.9.0 1.8.2 1.8.1 1.8.0 1.7.2 1.7.1 1.7.0 1.6.3 1.6.2 1.6.1 1.6.0 1.5.1 1.5.0 1.4.0 1.3.0 1.2.1 1.2.0 1.1.1 1.1.0 1.0.0 1.0.0-rc.0 0.20.0 0.18.0 0.17.1 0.17.0 0.16.1 0.16.0 0.15.0 0.14.0 0.13.0 0.12.0 0.11.0 0.10.0 0.9.1 0.9.0 0.7.0 0.6.1 0.6.0 0.5.2 0.5.1 0.5.0 0.4.1

Nerves System - Raspberry Pi A+ / B+ / B

HexDocs

Current section

Files

Jump to
Readme
117 Versions
3 Dependencies
Dependants
Files
Activity
nerves_system_rpi config.txt
Raw

config.txt 

# Default Nerves RPi config.txt

#

# It's possible to override this file by using a custom fwup.conf

# configuration to pull in a replacement.

#

# Useful links:

# http://rpf.io/configtxt

# https://www.raspberrypi.org/documentation/configuration/device-tree.md

# https://github.com/raspberrypi/documentation/blob/master/configuration/device-tree.md

# https://github.com/raspberrypi/firmware/blob/master/boot/overlays/README



kernel=zImage



# Disable the boot rainbow

disable_splash=1



# This, along with the Raspberry Pi "x" firmware is needed for the camera

# to work. The Raspberry Pi "x" firmware is selected via the Buildroot

# configuration. See Target packages->Hardware handling->Firmware.

gpu_mem=192



# Enable I2C, SPI, and audio

dtparam=i2c_arm=on

dtparam=spi=on

dtparam=audio=on



# Automatically load overlays for detected cameras

camera_auto_detect=1



# Comment this in or modify to enable OneWire

# NOTE: check that the overlay that you specify is in the boot partition or

#       this won't work.

#dtoverlay=w1-gpio-pullup,gpiopin=4



# The ramoops overlay works with the pstore driver to preserve crash

# information across reboots in DRAM

dtoverlay=ramoops



# Enable the UART via GPIOs 14 and 15 (ttyAMA0) on the RPi0 W.

# See https://www.raspberrypi.org/documentation/configuration/uart.md.

enable_uart=1

dtoverlay=miniuart-bt

# Set the GPU frequency so that the MiniUART (/dev/ttyS0) can be used for

# Bluetooth. This has a small performance impact. See

# https://www.raspberrypi.org/documentation/computers/config_txt.html#overclocking.

core_freq=250