AXP209 PMIC interface for Elixir (C.H.I.P. Power Management IC)
OTP application for reading the BNO-055 absolute orientation sensor. Euler angles are read at 20hz and published to a configured local...
Hex package to use 8x8 LED matrix or 7-segment displays with MAX72XX microchip in Elixir/Nerves projects. Uses elixir_ale SPI protocol fo...
Hex package to use character matrix LCD displays including HD44780 in your Elixir/nerves projects. Uses elixir_ale for IO.
Reads data from RaspberryPi GPIO pins
Sends data to a RaspberryPi GPIO pin
Exred node to control a SunFounder PiCar
Use Dexter Industries' GrovePi+ and GrovePiZero boards and many Grove sensors.
OTP application for reading the HMC5883L 3-axis magnetometer. Magnetic heading is read at approx. 13hz (every 75ms)
Module to control the LED-Backpack HT16K33 by Adafruit over I2C. Including Submodules to controll specific Adafruit LEDs lik the Seven Se...
Provides a driver for INA219-based voltage and current sensors connected via I2C
Ledx is a simple library for interfacing with LEDs on embedded platforms.
This is a module for transmitter data using LoRa Radios. Radios: Semtech SX1276/77/78/79 based boards.
Driver for the MAX17040 and MAX17041 lithium battery monitoring ICs
Elixir implementation of the pyhton motor_hat library from Adafruit for there motor_hat board. Library: https://github.com/adafruit/Adaf...
Driver for the MPL3115A2 altimeter connected via I2C.
Grove module support for Nerves.
Driver for PCA9641 2-channel I2C bus master arbiter chip
Driver for PCA9685 16 channel 12-bit PWM driver connected via I2C
RFM69 is a library to handle sub-GHz wireless packet communication via an RFM69 chip.
A library to read a DS3231 Real time clock module I've only tested this with a raspberry pi a+ and a sunfounder ds3231 board.
An application to demonstrate how one might write an OTP-compliant GenServer Application for an IoT device accessed with ElixirALE
Elixir driver for the SHT3x (SHT30, SHT31, SHT35) series temperature and humidity sensors from Sensirion.
Provides a driver for SSD1306-based monochrome displays connected via I2C
SubgRfspy is a library to handle sub-GHz wireless packet communication via a TI cc1110 chip running subg_rfspy.
Read CRGB data from TCS34725 sensors over I2c!
Wafer is an Elixir library to make writing drivers for i2c and SPI connected peripherals and interacting with GPIO pins easier.