Nerves System - BeagleBone Black, BeagleBone Green, PocketBeagle and more
Initialization setup for Nerves devices
Use character liquid crystal display (LCD) in Elixir
Wafer is an Elixir library to make writing drivers for i2c and SPI connected peripherals and interacting with GPIO pins easier.
Implementation for Pimoroni Scroll Hat boards and IS31FL3731 LED driver
Driver for the VCNL4040 ambient light and proximity sensor
Simulated hardware for Elixir Circuits
Driver for DHT 11, DHT 22, and AM2302 temperature/humidity sensors
OLED is a library to manage the monochrome OLED screen based on chip SSD1306. Implements a Scenic driver but also set of graphic primitve...
Driver for PCA9641 2-channel I2C bus master arbiter chip
Driver for PCA9685 16 channel 12-bit PWM driver connected via I2C
ILI9486 Elixir driver
Develop on embedded devices with Livebook and Nerves
AVR is a library to upload a firmware into AVR microcontrollers
ST7789 Elixir driver
A library to drive the Inky series of eInk displays from Pimoroni. Ported from the original Python project, all Elixir.
For HC_SR_501 sensores. Detects movemement and determine small-room occupancy.
An helper library to 'breadboarding' with Elixir with a single-board computer using `Elixir Circuits`
A small library to interact with keypads connected to GPIO pins
A library for interfacing with SSD1322 based OLED displays
Scenic render and input driver for Waveshare display HAT for Raspberry PI
Testing library for mocking Circuits libraries through a sequence of steps.
Blink LEDs or relays via GPIO with ease. Features artful gimmicks for creative setups.
Elixir driver for PCD8544 based LCD displays
Send GPIO events to Scenic
Setup and Maintenance Tools with RESTish API
Library for receiving/transmitting data over nRF24L01+ transciever.
Driver for the TMF882X family of multi-zone direct time-of-flight (dToF) distance sensor
This is an Elixir library for the π Relay Plate. https://pi-plates.com/product/relayplate/
Interface with the HC-SR04 ultrasonic distance sensor.