Use Dexter Industries' GrovePi+ and GrovePiZero boards and many Grove sensors.
Hex package to use character matrix LCD displays including HD44780 in your Elixir/nerves projects. Uses elixir_ale for IO.
Grove module support for Nerves.
RFM69 is a library to handle sub-GHz wireless packet communication via an RFM69 chip.
Hex package to use 8x8 LED matrix or 7-segment displays with MAX72XX microchip in Elixir/Nerves projects. Uses elixir_ale SPI protocol fo...
A library to read a DS3231 Real time clock module I've only tested this with a raspberry pi a+ and a sunfounder ds3231 board.
AXP209 PMIC interface for Elixir (C.H.I.P. Power Management IC)
Elixir implementation of the pyhton motor_hat library from Adafruit for there motor_hat board. Library: https://github.com/adafruit/Adaf...
SubgRfspy is a library to handle sub-GHz wireless packet communication via a TI cc1110 chip running subg_rfspy.
OTP application for reading the BNO-055 absolute orientation sensor. Euler angles are read at 20hz and published to a configured local...
An application to demonstrate how one might write an OTP-compliant GenServer Application for an IoT device accessed with ElixirALE
OTP application for reading the HMC5883L 3-axis magnetometer. Magnetic heading is read at approx. 13hz (every 75ms)
Module to control the LED-Backpack HT16K33 by Adafruit over I2C. Including Submodules to controll specific Adafruit LEDs lik the Seven Se...
Ledx is a simple library for interfacing with LEDs on embedded platforms.
Reads data from RaspberryPi GPIO pins
Read CRGB data from TCS34725 sensors over I2c!
Elixir driver for the SHT3x (SHT30, SHT31, SHT35) series temperature and humidity sensors from Sensirion.
Sends data to a RaspberryPi GPIO pin