xandra

# Changelog

## v0.16.0

  * Add the `:sync_connect` option to `Xandra.Cluster.start_link/1`.

## v0.15.0

This is a bigger release than usual. Part of it is that the previous release happened quite a long time before this one.

The main changes in this release are all around **clustering**. We made Xandra's clustering significantly smarter. `Xandra.Cluster` now:

  * autodiscovers nodes in the cluster by default
  * uses less resources (only one *control connection* rather than one per node)
  * has support for "load-balancing policies" to control which nodes to connect to and which nodes to route queries too

This is also the first release where Xandra starts publishing [Telemetry](https://github.com/beam-telemetry/telemetry) events.

**Breaking changes**:

  * Drop support for Cassandra version 2 and older.
  * Drop support for Elixir 1.10 and below. Xandra now requires Elixir 1.11+.
  * Drop support for nimble_options `0.x`. Xandra now depends on nimble_options `~> 1.0`.
  * Remove the `:priority` value for the `:load_balancing` option in `Xandra.Cluster.start_link/1`.
  * Always enable node autodiscovery for clusters.
  * Remove support for the `:address` and `:port` options in `Xandra.start_link/1`.

**Improvements**:

  * Add support for the Cassandra *native protocol* v5 (previously supported were only v3 and v4).
  * Start emitting [Telemetry](https://github.com/beam-telemetry/telemetry) events, see `Xandra.Telemetry`.
  * Add support for **custom payloads**.
  * Add support for Decimal 2.0+ (and keep supporting 1.x).
  * Add the following options to `Xandra.Cluster.start_link/1`:
    * `:refresh_topology_interval`
    * `:target_pools`
  * Add the `Xandra.Cluster.LoadBalancingPolicy` behaviour and the following built-in load-balancing policies:
    * `Xandra.Cluster.LoadBalancingPolicy.Random`
    * `Xandra.Cluster.LoadBalancingPolicy.DCAwareRoundRobin`
  * Add `Xandra.start_link_opts_schema/0`.
  * Add `Xandra.Cluster.Host`.
  * Add `Xandra.stop/1-3` and `Xandra.Cluster.stop/1-3`.
  * Make the `Xandra.conn/0` type public.

**Bug fixes and deprecations**:

  * Deprecate the `:autodiscovery` option in `Xandra.Cluster.start_link/1`.
  * Deprecate the `:random` value for the `:load_balancing` option in `Xandra.Cluster.start_link/1`.
  * Fix spec for the `Xandra.Batch.t/0` type.
  * Add some missing error codes to the native protocols.
  * Fix a bug where we were not using the `:default_consistency` option in `Xandra.start_link/1`.

## v0.14.0

**Breaking changes**:

  * Drop support for Elixir 1.8 and below. Xandra now requires Elixir 1.9+.

**Improvements**:

  * Implement significantly-more accurate and strict validation of options for `Xandra` functions.

**Bug fixes**:

  * Fix schema change payloads with UDFs in native protocol v3.
  * Filter nodes with null `host_id` when autodiscovering nodes in `Xandra.Cluster`.
  * Fix some warnings related to upgrading DBConnection.
  * Make connections aware of the current keyspace, which fixes some issues with the prepared query cache.
  * Fix an issue where pagination would break for some batch queries: with a lightweight transaction the returned result would be a page representing the status of that transaction, and we did not support that.

## v0.13.1

  * Fix the spec for `Xandra.Batch.add/3`.
  * Reconnect to the control connection using the full address (and not the IP of the peername) in `Xandra.Cluster`.
  * Set the `:xandra_address` and `:xandra_port` metadata in logs for Xandra connections.

## v0.13.0

  * Add support for Cassandra native protocol v4. By default, we'll use v3, but you can pass in a `:protocol_version` when starting a connection to force protocol v4. Protocol v4 introduces the `:not_set` value. See the documentation of the `Xandra` module.
  * Add support for tracing on a per-query basis. If `:tracing` is set to `true`, then a tracing ID will be returned with the Cassandra response. See the documentation for more information.
  * Fix a bug with decoding `Decimal` values.
  * Fix a bug with `Xandra.Cluster` where, in cases of clusters with a single node, the connection wouldn't reconnect to the node in case of disconnections.

**Breaking changes**:

  * Remove `Xandra.Page.more_pages_available?/1`. This was hard-deprecated in previous versions.
  * Remove the `:cursor` option for queries. This was hard-deprecated in previous versions.

## v0.12.0

  * Add a page in the documentation that compares Elixir data types and their Cassandra counterparts.
  * Fix some Dialyzer errors caused by opaque data types.
  * Support cluster-aware retrying through `:retry_strategy` in `Xandra.Cluster.execute/3,4` (in the previous release we would retry queries but only on the same node).
  * Fix `Xandra.Cluster.stream_pages!/4` which was broken in the previous release.

**Breaking changes**:

  * Change the format of `inet` values for IPv6. When encoding a IPv6 address, it should be given to Xandra as an 8-element tuple of integers representing byte couples. When Cassandra returns IPv6 addresses, they are now returned as 8-element tuples of integers representing byte couples. This is to align Xandra with the usage of IPv6 addresses in Erlang/OTP (see the `:inet.ip_address/0` type).
  * Support autodiscovery of nodes in the same data center in `Xandra.Cluster` with support for the `:random` load balancing strategy only. This also means support for nodes that are added or removed to the cluster (provided they're in the same datacenter). This is a breaking change because autodiscovery is active **by default**. If you want to keep the previous behavior, pass `autodiscovery: false` to `Xandra.Cluster.start_link/1`.

## v0.11.0

  * Add `Xandra.child_spec/1`.
  * Add encryption support through the `:encryption` option.
  * Add the `:decimal_format` option to return decimals as tuples or [`Decimal`](https://github.com/ericmj/decimal) structs. If you want to use `decimal_format: :decimal`, you have to specify [decimal](https://github.com/ericmj/decimal) as a dependency.
  * Add the `:default_consistency` option to provide a connection-wide default consistency.

**Breaking changes**:

  * Add the `:uuid_format` and `:timeuuid_format` options to return UUIDs as binaries or human-readable strings. This is a breaking change because the default changed to `:string`. If you want to keep the previous behavior, pass `uuid_format: :binary` or `timeuuid_format: :binary` to `Xandra.execute/3/4`.
  * Remove support for the `:pool` option in Xandra. Now the pool of connections is always a pool with size configurable by `:pool_size`.
  * Add `Xandra.Cluster` as a separate module with an API that mirrors `Xandra`, instead of as a DBConnection pool.
  * Bump the Elixir requirement to ~> 1.6.

## v0.10.0

  * Added the `:atom_keys` option to return and accept column names as atoms.
  * Fixed decoding of user-defined data types when new fields added afterwards.
  * Fixed connection ping failures when using compression.

## v0.9.2

  * Fixed Elixir v1.6 warnings.

## v0.9.1

  * Started accepting UUIDs in binary representation.
  * Added handling of legacy empty values for non-string types.

## v0.9.0

  * Added native support for `Date`, `Time`, and `DateTime`.
  * Added support for the counter data type.
  * Made more optimizations to page content decoding.
  * Replaced the `:cursor` option used for manual result paging with the more explicit `:paging_state` option.

**Breaking changes**:

  * Started decoding by default the date, time, and timestamp data types to `Date`, `Time`, and `DateTime` respectively.

## v0.8.0

  * Added support for priority load balancing strategy for clustering.

## v0.7.2

  * Fixed a bug in the binary protocol that affected nodes going up/down when using `Xandra.Cluster`.

## v0.7.1

  * Made `Xandra.Cluster` to fully utilize authentication.

## v0.7.0

  * Added support for authentication.

## v0.6.1

  * Optimized page content decoding by using single match context.

## v0.6.0

  * Added support for user-defined data types.

## v0.5.1

  * Optimized request encoding by using iodata.

## v0.5.0

  * Added support for date, time, smallint, and tinyint data types.

## v0.4.3

  * Fixed a bug where conditional prepared queries failed to decode.

## v0.4.2

  * Fixed a bug with encoding `nil` values in the protocol.

## v0.4.1

  * Fixed a bug where negative varint values were decoded incorrectly.

## v0.4.0

  * Fixed a bug where prepared queries inside batch queries were not being re-prepared in case of "unprepared" errors. Now, prepared queries that fail with "unprepared" errors in batch queries are re-prepared before executing the batch again.
  * Added support for "retry strategies" (modules that implement `Xandra.RetryStrategy`) to handle retrying of failed queries.

## v0.3.2

  * Added support for named parameters for prepared queries in batches and started raising an explanatory error message if named parameters are used in simple queries in batches.
  * Added `Xandra.run/3` to execute a function with a single Xandra connection checked out from the pool.

## v0.3.1

  * Made statement re-preparing happen on the same connection.

## v0.3.0

  * Renamed `Xandra.Connection.Error` to `Xandra.ConnectionError`.
  * Added support for clustering with random load balancing strategy.
  * Fixed the error message for ping failures.
  * Fixed a bug where the TCP socket would not be closed in case of failures during connect.

## v0.2.0

  * Added support for compression of protocol data (see documentation for the `Xandra` module).
  * Added support for the `:serial_consistency` option in `Xandra.execute(!)/3,4`.
  * Added support for the `:timestamp` option in `Xandra.execute(!)/4` when executing simple or prepared queries.
  * Fixed a bug when repreparing queries that got stale in the cache.