Packages

nerves_system_rpi4

1.8.2
2.1.0 2.0.4 2.0.3 2.0.2 2.0.1 2.0.0 2.0.0-rc.3 2.0.0-rc.2 2.0.0-rc.1 retired 2.0.0-rc.0 retired 1.33.1 1.33.0 1.32.0 1.31.4 1.31.3 1.31.2 1.31.1 1.31.0 1.30.1 1.30.0 1.29.1 1.29.0 1.28.1 1.28.0 1.27.1 1.27.0 1.26.0 1.25.1 1.25.0 1.24.1 1.24.0 1.23.2 1.23.1 1.23.0 1.22.2 1.22.1 1.22.0 1.21.2 1.21.1 1.21.0 1.20.2 1.20.1 1.20.0 1.19.0 1.18.4 1.18.3 1.18.2 1.18.1 1.18.0 1.17.3 1.17.2 1.17.1 1.17.0 1.16.3 1.16.2 1.16.1 1.16.0 1.15.1 1.15.0 1.14.0 1.13.5 1.13.4 retired 1.13.3 1.13.2 1.13.1 retired 1.13.0 1.12.2 1.12.1 1.12.0 1.11.3 1.11.2 1.11.1 1.11.0 1.10.2 1.10.1 1.10.0 1.9.2 1.9.1 1.9.0 1.8.2 1.8.1

Nerves System - Raspberry Pi 4 (64-bits)

HexDocs

Current section

Files

Jump to
Readme
81 Versions
4 Dependencies
Dependants
Files
Activity
nerves_system_rpi4 CHANGELOG.md
Raw

CHANGELOG.md 

# Changelog



## v1.8.2



This release fixes an issue that broke display output on small LCD screens.

Updating the Raspberry Pi firmware to the latest from the Raspberry Pi

Foundation fixed the issue. See

https://github.com/fhunleth/rpi_fb_capture/issues/2 for details.



* Updated dependencies

  * [nerves_system_br v1.8.5](https://github.com/nerves-project/nerves_system_br/releases/tag/v1.8.5)



## v1.8.1



This is the initial Nerves System release for the Raspberry Pi 4. It's version

corresponds to other Nerves System releases for Raspberry Pi's for ease of

referring to version numbers.



While similar looking, the Raspberry Pi 4 has some significant differences with

other Raspberry Pis. The following functionality appears to work so far:



1. Support for up to 4 GB of DRAM (1 GB and 2 GB versions supported too)

2. I2C, SPI, and GPIO - The RPi 4 has additional pin mux options. They have not

   been tested.

3. The primary UART has not been redirected away from the Bluetooth module. This

   is useful for using BLE with the Harald library, but is different from the

   other RPi defaults

4. The Pi Camera and Raspberry Pi Foundation 7" Touchscreen both work

5. Gigabit Ethernet works

6. WiFi appears to work

7. USB 3 devices



The following major features have not been tested:



1. OpenGL support and HDMI output

2. USB Gadget mode via the USB C connector (the gadget drivers are currently

   enabled, though)



Additionally, the Raspberry Pi 4 port uses 32-bit mode on the ARM even though

the processor supports 64-bit usage. 64-bit usage didn't build when tried and

the Raspberry Pi Foundation promotes 32-bit usage so that's what's used here.



* Primary constituent project versions

  * Erlang 22.0.7

  * [nerves_system_br v1.8.4](https://github.com/nerves-project/nerves_system_br/releases/tag/v1.8.4)

  * [nerves_toolchain_arm_unknown_linux_gnueabihf v1.2.0](https://github.com/nerves-project/toolchains/releases/tag/v1.2.0)