Packages

nerves_system_rpi3a

2.0.4
2.1.0 2.0.4 2.0.3 2.0.2 2.0.1 2.0.0 2.0.0-rc.3 2.0.0-rc.2 2.0.0-rc.1 retired 2.0.0-rc.0 retired 1.33.1 1.33.0 1.32.0 1.31.4 1.31.3 1.31.2 1.31.1 1.31.0 1.30.1 1.30.0 1.29.1 1.29.0 1.28.1 1.28.0 1.27.1 1.27.0 1.26.0 1.25.1 1.25.0 1.24.1 1.24.0 1.23.2 1.23.1 1.23.0 1.22.2 1.22.1 1.22.0 1.21.2 1.21.1 1.21.0 1.20.2 1.20.1 1.20.0 1.19.0 1.18.4 1.18.3 1.18.2 1.18.1 1.18.0 1.17.3 1.17.2 1.17.1 1.17.0 1.16.2 1.16.1 1.16.0 1.15.1 1.15.0 1.14.0 1.13.3 1.13.2 1.13.1 1.13.0 1.12.2 1.12.1 1.12.0 1.11.2 1.11.1 1.11.0 1.10.2 1.10.1 1.10.0 1.9.2 1.9.1 1.9.0 1.8.2 1.8.1 1.8.0 1.7.2 1.7.1 1.7.0 1.6.3 1.6.2 1.6.1

Nerves System - Raspberry Pi 3 A+ and Zero 2 W

HexDocs

Current section

Files

Jump to
Readme
84 Versions
3 Dependencies
Dependants
Files
Activity
nerves_system_rpi3a config.txt
Raw

config.txt 

# Default Nerves RPi 3 A+ config.txt

#

# It's possible to override this file by using a custom fwup.conf

# configuration to pull in a replacement.

#

# Useful links:

# https://www.raspberrypi.org/documentation/configuration/config-txt/README.md

# https://www.raspberrypi.org/documentation/configuration/device-tree.md

# https://github.com/raspberrypi/documentation/blob/master/configuration/device-tree.md

# https://github.com/raspberrypi/firmware/blob/master/boot/overlays/README



kernel=zImage



# Disable the boot rainbow

disable_splash=1



# This, along with the Raspberry Pi "x" firmware is needed for the camera

# to work. The Raspberry Pi "x" firmware is selected via the Buildroot

# configuration. See Target packages->Hardware handling->Firmware.

gpu_mem=192



# Enable I2C, SPI, and audio

dtparam=i2c_arm=on

dtparam=spi=on

dtparam=audio=on



# Automatically load overlays for detected cameras

camera_auto_detect=1



# Enable drivers for the Raspberry Pi 7" Touchscreen

#

# This makes it possible to run Scenic out of the box with the popular

# Raspberry Pi 7" Touchscreen. It appears to be harmless for non-touchscreen

# users, but if not, let us know!

dtoverlay=rpi-ft5406

dtoverlay=rpi-backlight



# Comment this in or modify to enable OneWire

# NOTE: check that the overlay that you specify is in the boot partition or

#       this won't work.

#dtoverlay=w1-gpio-pullup,gpiopin=4

dtoverlay=dwc2



# The ramoops overlay works with the pstore driver to preserve crash

# information across reboots in DRAM

dtoverlay=ramoops



# Enable the UART (/dev/ttyAMA0) on the RPi3.

enable_uart=1

dtoverlay=miniuart-bt

# Set the GPU frequency so that the MiniUART (/dev/ttyS0) can be used for

# Bluetooth. This has a small performance impact. See

# https://www.raspberrypi.org/documentation/computers/config_txt.html#overclocking.

core_freq=250