Packages

nerves_system_rpi2

1.2.0
2.1.0 2.0.4 2.0.3 2.0.2 2.0.1 2.0.0 2.0.0-rc.3 2.0.0-rc.2 2.0.0-rc.1 retired 2.0.0-rc.0 retired 1.33.1 1.33.0 1.32.0 1.31.4 1.31.3 1.31.2 1.31.1 1.31.0 1.30.1 1.30.0 1.29.1 1.29.0 1.28.1 1.28.0 1.27.1 1.27.0 1.26.0 1.25.1 1.25.0 1.24.1 1.24.0 1.23.2 1.23.1 1.23.0 1.22.2 1.22.1 1.22.0 1.21.2 1.21.1 1.21.0 1.20.2 1.20.1 1.20.0 1.19.0 1.18.4 1.18.3 1.18.2 1.18.1 1.18.0 1.17.3 1.17.2 1.17.1 1.17.0 1.16.2 1.16.1 1.16.0 1.15.1 1.15.0 1.14.0 1.13.3 1.13.2 1.13.1 1.13.0 1.12.2 1.12.1 1.12.0 1.11.2 1.11.1 1.11.0 1.10.2 1.10.1 1.10.0 1.9.2 1.9.1 1.9.0 1.8.2 1.8.1 1.8.0 1.7.2 1.7.1 1.7.0 1.6.3 1.6.2 1.6.1 1.6.0 1.5.1 1.5.0 1.4.0 1.3.0 1.2.1 1.2.0 1.1.1 1.1.0 1.0.0 1.0.0-rc.0 0.20.0 0.18.0 0.17.1 0.17.0 0.16.1 0.16.0 0.15.0 0.14.0 0.13.0 0.12.1 0.11.0 0.10.0 0.9.0 0.7.0 0.6.1 0.6.0 0.5.2 0.5.1 0.5.0 0.4.1

Nerves System - Raspberry Pi 2 B

HexDocs

Current section

Files

Jump to
Readme
115 Versions
4 Dependencies
Dependants
Files
Activity
nerves_system_rpi2 config.txt
Raw

config.txt 

# Default Nerves RPi 2 config.txt

#

# It's possible to override this file by using a custom fwup.conf

# configuration to pull in a replacement.

#

# Useful links:

# https://www.raspberrypi.org/documentation/configuration/config-txt/README.md

# https://github.com/raspberrypi/documentation/blob/master/configuration/device-tree.md



kernel=zImage



# This, along with the Raspberry Pi "x" firmware is need for the camera

# to work. The Raspberry Pi "x" firmware is selected via the Buildroot

# configuration. See Target packages->Hardware handling->Firmware.

gpu_mem=192



# Enable I2C and SPI

dtparam=i2c_arm=on,spi=on



# Comment this in or modify to enable OneWire

# NOTE: check that the overlay that you specify is in the boot partition or

#       this won't work.

#dtoverlay=w1-gpio-pullup,gpiopin=4



# Enable the UART (/dev/ttyAMA0) on the RPi2.

enable_uart=1