Packages
nerves_system_br
0.5.2
1.34.0
1.33.9
1.33.8
1.33.7
1.33.6
1.33.5
1.33.4
1.33.3
1.33.2
1.33.1
1.33.0
1.32.5
1.32.4
1.32.3
1.32.2
1.32.1
1.32.0
1.31.7
1.31.6
1.31.5
1.31.4
1.31.3
1.31.2
1.31.1
1.31.0
1.30.1
1.30.0
1.29.3
1.29.2
1.29.1
1.29.0
1.28.3
1.28.2
1.28.1
1.28.0
1.27.3
1.27.2
1.27.1
1.27.0
1.26.1
1.26.0
1.25.3
1.25.2
1.25.1
1.25.0
1.24.1
1.24.0
1.23.3
1.23.2
1.23.1
1.23.0
1.22.8
1.22.7
1.22.6
1.22.5
1.22.4
1.22.3
1.22.2
1.22.1
1.22.0
1.21.6
1.21.5
1.21.4
1.21.3
1.21.2
1.21.1
1.21.0
1.20.6
1.20.5
1.20.4
1.20.3
1.20.2
1.20.1
1.20.0
1.19.1
1.19.0
1.18.6
1.18.5
1.18.4
1.18.3
1.18.2
1.18.1
1.18.0
1.17.4
1.17.3
1.17.2
1.17.1
1.17.0
1.16.5
1.16.4
1.16.3
1.16.2
1.16.1
1.16.0
1.15.2
1.15.1
1.15.0
1.14.5
1.14.4
1.14.3
1.14.2
1.14.1
1.14.0
1.13.8
1.13.7
1.13.6
1.13.5
1.13.4
1.13.3
1.13.2
1.13.1
1.13.0
1.12.4
1.12.3
1.12.2
1.12.1
1.12.0
1.12.0-rc.0
1.11.4
1.11.3
1.11.2
1.11.1
1.11.0
1.10.3
1.10.2
1.10.1
1.10.0
1.9.5
1.9.4
1.9.3
1.9.2
1.9.1
1.9.0
1.8.6
1.8.5
1.8.4
1.8.3
1.8.2
1.8.1
1.8.0
1.7.3
1.7.2
1.7.1
1.7.0
1.6.8
1.6.7
1.6.6
1.6.5
1.6.4
1.6.3
1.6.2
1.6.1
1.6.0
1.5.6
1.5.5
1.5.4
1.5.3
1.5.2
1.5.1
1.5.0
1.4.5
1.4.4
1.4.3
1.4.2
1.4.1
1.4.0
1.3.2
1.3.1
1.3.0
1.2.2
1.2.1
1.2.0
1.1.0
1.0.1
1.0.0
1.0.0-rc.4
1.0.0-rc.3
1.0.0-rc.2
1.0.0-rc.1
1.0.0-rc.0
0.17.0
0.16.4
0.16.3
0.16.2
0.16.1-2017-11
0.16.0-2017-11
0.15.1
0.15.0
0.14.1
0.14.0
0.13.9
0.13.8
0.13.7
0.13.6
0.13.5
0.13.4
retired
0.13.3
0.13.2
0.13.0
0.12.1
0.12.0
0.11.1
0.11.0
0.10.1
0.10.0
0.9.4
0.9.3
0.9.2
0.9.1
0.9.0
0.8.2
0.8.1
0.8.0
0.7.0
0.6.1
0.6.0
0.5.2
0.5.1
0.5.0
0.4.2
0.4.1
Nerves System BR - Buildroot based build platform for Nerves Systems
Current section
Files
Jump to
Current section
Files
board/raspberrypi/config.txt
# Please note that this is only a sample, we recommend you to change it to fit
# your needs.
# You should override this file using a post-build script.
# See http://buildroot.org/downloads/manual/manual.html#rootfs-custom
# and http://elinux.org/RPiconfig for a description of config.txt syntax
# Device tree options are documented at
# https://github.com/raspberrypi/documentation/blob/master/configuration/device-tree.md
kernel=zImage
# This, along with the Raspberry Pi "x" firmware is need for the camera
# to work. See Target packages->Hardware handling->Firmware for "x" firmware.
gpu_mem=128
# Enable I2C and SPI
dtparam=i2c_arm=on,spi=on
# Comment this in or modify to enable OneWire
# NOTE: check that the overlay that you specify is in the boot partition or
# this won't work.
#dtoverlay=w1-gpio-pullup,gpiopin=4
# Enable the UART (/dev/ttyS0) on the RPi3.
enable_uart=1