Packages
nerves_system_bbb
2.26.1
2.30.0
2.29.5
2.29.4
2.29.3
2.29.2
2.29.1
2.29.0
2.28.0
2.27.3
2.27.2
2.27.1
2.27.0
2.26.1
2.26.0
2.25.1
2.25.0
2.24.0
2.23.0
2.22.1
2.22.0
2.21.0
2.20.2
2.20.1
2.20.0
2.19.1
2.19.0
2.18.2
2.18.1
2.18.0
2.17.2
2.17.1
2.17.0
2.16.2
2.16.1
2.16.0
2.15.3
2.15.2
2.15.1
2.15.0
retired
2.14.0
2.13.4
2.13.3
2.13.2
2.13.1
2.13.0
2.12.3
2.12.2
2.12.1
2.12.0
2.11.2
2.11.1
2.11.0
2.10.1
2.10.0
2.9.0
2.8.3
2.8.2
2.8.1
2.8.0
2.7.2
2.7.1
2.7.0
2.6.2
2.6.1
2.6.0
2.5.2
2.5.1
2.5.0
2.4.2
2.4.1
2.4.0
2.3.2
2.3.1
2.3.0
2.2.2
2.2.1
2.2.0
2.1.3
2.1.2
2.1.1
2.1.0
2.0.0
2.0.0-rc.0
1.4.0
1.3.0
1.2.1
1.2.0
1.1.1
1.1.0
1.0.0
1.0.0-rc.1
1.0.0-rc.0
0.20.0
0.18.0
0.17.1
0.17.0
0.16.1
0.16.0
0.15.0
0.14.0
0.13.0
0.12.0
0.11.0
0.10.0
0.9.0
0.8.0
0.7.1
0.7.0
0.6.2
0.6.1
0.6.0
0.5.0
Nerves System - BeagleBone Black, BeagleBone Green, PocketBeagle and more
Current section
Files
Jump to
Current section
Files
rootfs_overlay/etc/boardid.config
# boardid.config
# Read the serial number from the U-boot environment block. The variable
# "nerves_serial_number" is the desired variable to use. "serial_number" is
# checked as a backup.
-b uboot_env -u nerves_serial_number
-b uboot_env -u serial_number
# Use the serial number programmed into the EEPROM. All official
# Beagleboard.org hardware supports this.
-b bbb
# Use the serial number reported in /proc/cpuinfo. This works on
# the TI AM3358 SDK and derivatives.
-b cpuinfo
# Use the MAC address of the first Ethernet port. This is useful for
# custom boards that don't include the EEPROM or leave it unprogrammed.
-b macaddr