Packages
grizzly
7.2.0
9.1.4
9.1.2
9.1.1
9.1.0
9.0.0
8.15.3
8.15.2
8.15.1
8.15.0
8.14.0
8.13.0
8.12.0
8.11.3
8.11.2
8.11.1
8.11.0
8.10.0
8.9.0
8.8.1
8.8.0
8.7.1
8.7.0
8.6.12
8.6.11
8.6.10
8.6.9
8.6.8
8.6.7
retired
8.6.6
8.6.5
8.6.4
8.6.3
8.6.2
8.6.1
8.6.0
8.5.3
8.5.2
8.5.1
8.5.0
8.4.0
8.3.0
8.2.3
8.2.2
8.2.1
8.2.0
8.1.0
8.0.1
8.0.0
7.4.3
7.4.2
7.4.1
7.4.0
7.3.0
7.2.0
7.1.4
7.1.3
7.1.2
7.1.1
7.1.0
7.0.4
7.0.3
7.0.2
7.0.1
7.0.0
6.8.8
6.8.7
6.8.6
6.8.5
6.8.4
6.8.3
6.8.2
6.8.1
6.8.0
6.7.1
6.7.0
6.6.1
6.6.0
6.5.1
6.5.0
6.4.0
6.3.0
6.2.0
6.1.1
6.1.0
6.0.1
6.0.0
5.4.1
5.4.0
5.3.0
5.2.8
5.2.7
5.2.6
5.2.5
5.2.4
5.2.3
5.2.2
5.2.1
5.2.0
5.1.2
5.1.1
5.1.0
5.0.2
5.0.1
5.0.0
4.0.1
4.0.0
3.0.0
2.1.0
2.0.0
1.0.1
1.0.0
0.22.7
0.22.6
0.22.5
0.22.4
0.22.3
0.22.2
0.22.1
0.22.0
0.21.1
0.21.0
0.20.2
0.20.1
0.20.0
0.19.1
0.19.0
0.18.3
0.18.2
0.18.1
0.18.0
0.17.7
0.17.6
0.17.5
0.17.4
0.17.3
0.17.2
0.17.1
0.17.0
0.16.2
0.16.1
0.16.0
0.15.11
0.15.10
0.15.9
0.15.8
0.15.7
0.15.6
0.15.5
0.15.4
0.15.3
0.15.2
0.15.1
0.15.0
0.14.8
0.14.7
0.14.6
0.14.5
0.14.4
0.14.3
0.14.2
0.14.1
0.14.0
0.13.0
0.12.3
0.12.2
0.12.1
0.12.0
0.11.0
0.10.3
0.10.2
0.10.1
0.10.0
0.9.0
0.9.0-rc.4
0.9.0-rc.3
0.9.0-rc.2
0.9.0-rc.1
0.9.0-rc.0
0.8.8
0.8.7
0.8.6
0.8.5
0.8.4
0.8.3
0.8.2
0.8.1
0.8.0
0.7.0
0.6.6
0.6.5
0.6.4
0.6.3
0.6.2
0.6.1
0.6.0
0.5.0
0.4.3
0.4.2
Elixir Z-Wave library
Current section
Files
Jump to
Current section
Files
lib/grizzly/firmware_update_handler.ex
defmodule Grizzly.FirmwareUpdateHandler do
@moduledoc """
Behaviour for handling incoming commands during the firmware update process
When you initialize a firmware update process you can pass the `:handler` option
to the function which can either be the a `pid` (defaults to caller pid) or a
module that implements this behaviour.
The report this callback function will most want to handle is:
- `Grizzly.ZWave.Commands.FirmwareUpdateMDRequestReport` It indicates whether the formware update was initiated successfully.
- `Grizzly.ZWave.Commands.FirmwareUpdateMDStatusReport` It is sent by the target device once the firmware update completes, successfully or in failure.
The callback might also want to be aware of:
- `Grizzly.ZWave.Commands.FirmwareUpdateMDGet` It is sent by the target device when it wants more firmware image fragments
- `Grizzly.ZWave.Commands.FirmwareMDReport` It might be sent by the target device during the upgrade to modify the maximum fragment size.
- `Grizzly.ZWave.Commands.FirmwareUpdateActivationReport` It is sent by the target device in response to an activation request and gives the activation status.
"""
alias Grizzly.ZWave.Command
@callback handle_command(Command.t(), keyword()) :: :ok
end