aws

# WARNING: DO NOT EDIT, AUTO-GENERATED CODE!
# See https://github.com/aws-beam/aws-codegen for more details.

defmodule AWS.GlobalAccelerator do
  @moduledoc """
  Global Accelerator

  This is the *Global Accelerator API Reference*.

  This guide is for developers who need detailed information about Global
  Accelerator API actions, data types, and errors. For more information about
  Global Accelerator features, see the [Global Accelerator Developer Guide](https://docs.aws.amazon.com/global-accelerator/latest/dg/what-is-global-accelerator.html).

  Global Accelerator is a service in which you create *accelerators* to improve
  the performance of your applications for local and global users. Depending on
  the type of accelerator you choose, you can gain additional benefits.

    * By using a standard accelerator, you can improve availability of
  your internet applications that are used by a global audience. With a standard
  accelerator, Global Accelerator directs traffic to optimal endpoints over the
  Amazon Web Services global network.

    * For other scenarios, you might choose a custom routing
  accelerator. With a custom routing accelerator, you can use application logic to
  directly map one or more users to a specific endpoint among many endpoints.

  Global Accelerator is a global service that supports endpoints in multiple
  Amazon Web Services Regions but you must specify the US West (Oregon) Region to
  create, update, or otherwise work with accelerators. That is, for example,
  specify `--region us-west-2` on AWS CLI commands.

  By default, Global Accelerator provides you with static IP addresses that you
  associate with your accelerator. The static IP addresses are anycast from the
  Amazon Web Services edge network. For IPv4, Global Accelerator provides two
  static IPv4 addresses. For dual-stack, Global Accelerator provides a total of
  four addresses: two static IPv4 addresses and two static IPv6 addresses. With a
  standard accelerator for IPv4, instead of using the addresses that Global
  Accelerator provides, you can configure these entry points to be IPv4 addresses
  from your own IP address ranges that you bring toGlobal Accelerator (BYOIP).

  For a standard accelerator, they distribute incoming application traffic across
  multiple endpoint resources in multiple Amazon Web Services Regions , which
  increases the availability of your applications. Endpoints for standard
  accelerators can be Network Load Balancers, Application Load Balancers, Amazon
  EC2 instances, or Elastic IP addresses that are located in one Amazon Web
  Services Region or multiple Amazon Web Services Regions. For custom routing
  accelerators, you map traffic that arrives to the static IP addresses to
  specific Amazon EC2 servers in endpoints that are virtual private cloud (VPC)
  subnets.

  The static IP addresses remain assigned to your accelerator for as long as it
  exists, even if you disable the accelerator and it no longer accepts or routes
  traffic. However, when you *delete* an accelerator, you lose the static IP
  addresses that are assigned to it, so you can no longer route traffic by using
  them. You can use IAM policies like tag-based permissions with Global
  Accelerator to limit the users who have permissions to delete an accelerator.
  For more information, see [Tag-based policies](https://docs.aws.amazon.com/global-accelerator/latest/dg/access-control-manage-access-tag-policies.html).

  For standard accelerators, Global Accelerator uses the Amazon Web Services
  global network to route traffic to the optimal regional endpoint based on
  health, client location, and policies that you configure. The service reacts
  instantly to changes in health or configuration to ensure that internet traffic
  from clients is always directed to healthy endpoints.

  For more information about understanding and using Global Accelerator, see the
  [Global Accelerator Developer Guide](https://docs.aws.amazon.com/global-accelerator/latest/dg/what-is-global-accelerator.html).
  """

  alias AWS.Client
  alias AWS.Request

  def metadata do
    %{
      abbreviation: nil,
      api_version: "2018-08-08",
      content_type: "application/x-amz-json-1.1",
      credential_scope: nil,
      endpoint_prefix: "globalaccelerator",
      global?: false,
      protocol: "json",
      service_id: "Global Accelerator",
      signature_version: "v4",
      signing_name: "globalaccelerator",
      target_prefix: "GlobalAccelerator_V20180706"
    }
  end

  @doc """
  Associate a virtual private cloud (VPC) subnet endpoint with your custom routing
  accelerator.

  The listener port range must be large enough to support the number of IP
  addresses that can be specified in your subnet. The number of ports required is:
  subnet size times the number of ports per destination EC2 instances. For
  example, a subnet defined as /24 requires a listener port range of at least 255
  ports.

  Note: You must have enough remaining listener ports available to map to the
  subnet ports, or the call will fail with a LimitExceededException.

  By default, all destinations in a subnet in a custom routing accelerator cannot
  receive traffic. To enable all destinations to receive traffic, or to specify
  individual port mappings that can receive traffic, see the [
  AllowCustomRoutingTraffic](https://docs.aws.amazon.com/global-accelerator/latest/api/API_AllowCustomRoutingTraffic.html)
  operation.
  """
  def add_custom_routing_endpoints(%Client{} = client, input, options \\ []) do
    meta = metadata()

    Request.request_post(client, meta, "AddCustomRoutingEndpoints", input, options)
  end

  @doc """
  Add endpoints to an endpoint group.

  The `AddEndpoints` API operation is the recommended option for adding endpoints.
  The alternative options are to add endpoints when you create an endpoint group
  (with the
  [CreateEndpointGroup](https://docs.aws.amazon.com/global-accelerator/latest/api/API_CreateEndpointGroup.html) API) or when you update an endpoint group (with the
  [UpdateEndpointGroup](https://docs.aws.amazon.com/global-accelerator/latest/api/API_UpdateEndpointGroup.html)
  API).

  There are two advantages to using `AddEndpoints` to add endpoints:

    * It's faster, because Global Accelerator only has to resolve the
  new endpoints that you're adding.

    * It's more convenient, because you don't need to specify all of the
  current endpoints that are already in the endpoint group in addition to the new
  endpoints that you want to add.
  """
  def add_endpoints(%Client{} = client, input, options \\ []) do
    meta = metadata()

    Request.request_post(client, meta, "AddEndpoints", input, options)
  end

  @doc """
  Advertises an IPv4 address range that is provisioned for use with your Amazon
  Web Services resources through bring your own IP addresses (BYOIP).

  It can take a few minutes before traffic to the specified addresses starts
  routing to Amazon Web Services because of propagation delays.

  To stop advertising the BYOIP address range, use [
  WithdrawByoipCidr](https://docs.aws.amazon.com/global-accelerator/latest/api/WithdrawByoipCidr.html).

  For more information, see [Bring your own IP addresses (BYOIP)](https://docs.aws.amazon.com/global-accelerator/latest/dg/using-byoip.html)
  in the *Global Accelerator Developer Guide*.
  """
  def advertise_byoip_cidr(%Client{} = client, input, options \\ []) do
    meta = metadata()

    Request.request_post(client, meta, "AdvertiseByoipCidr", input, options)
  end

  @doc """
  Specify the Amazon EC2 instance (destination) IP addresses and ports for a VPC
  subnet endpoint that can receive traffic for a custom routing accelerator.

  You can allow traffic to all destinations in the subnet endpoint, or allow
  traffic to a specified list of destination IP addresses and ports in the subnet.
  Note that you cannot specify IP addresses or ports outside of the range that you
  configured for the endpoint group.

  After you make changes, you can verify that the updates are complete by checking
  the status of your accelerator: the status changes from IN_PROGRESS to DEPLOYED.
  """
  def allow_custom_routing_traffic(%Client{} = client, input, options \\ []) do
    meta = metadata()

    Request.request_post(client, meta, "AllowCustomRoutingTraffic", input, options)
  end

  @doc """
  Create an accelerator.

  An accelerator includes one or more listeners that process inbound connections
  and direct traffic to one or more endpoint groups, each of which includes
  endpoints, such as Network Load Balancers.

  Global Accelerator is a global service that supports endpoints in multiple
  Amazon Web Services Regions but you must specify the US West (Oregon) Region to
  create, update, or otherwise work with accelerators. That is, for example,
  specify `--region us-west-2` on AWS CLI commands.
  """
  def create_accelerator(%Client{} = client, input, options \\ []) do
    meta = metadata()

    Request.request_post(client, meta, "CreateAccelerator", input, options)
  end

  @doc """
  Create a custom routing accelerator.

  A custom routing accelerator directs traffic to one of possibly thousands of
  Amazon EC2 instance destinations running in a single or multiple virtual private
  clouds (VPC) subnet endpoints.

  Be aware that, by default, all destination EC2 instances in a VPC subnet
  endpoint cannot receive traffic. To enable all destinations to receive traffic,
  or to specify individual port mappings that can receive traffic, see the [
  AllowCustomRoutingTraffic](https://docs.aws.amazon.com/global-accelerator/latest/api/API_AllowCustomRoutingTraffic.html)
  operation.

  Global Accelerator is a global service that supports endpoints in multiple
  Amazon Web Services Regions but you must specify the US West (Oregon) Region to
  create, update, or otherwise work with accelerators. That is, for example,
  specify `--region us-west-2` on AWS CLI commands.
  """
  def create_custom_routing_accelerator(%Client{} = client, input, options \\ []) do
    meta = metadata()

    Request.request_post(client, meta, "CreateCustomRoutingAccelerator", input, options)
  end

  @doc """
  Create an endpoint group for the specified listener for a custom routing
  accelerator.

  An endpoint group is a collection of endpoints in one Amazon Web Services
  Region.
  """
  def create_custom_routing_endpoint_group(%Client{} = client, input, options \\ []) do
    meta = metadata()

    Request.request_post(client, meta, "CreateCustomRoutingEndpointGroup", input, options)
  end

  @doc """
  Create a listener to process inbound connections from clients to a custom
  routing accelerator.

  Connections arrive to assigned static IP addresses on the port range that you
  specify.
  """
  def create_custom_routing_listener(%Client{} = client, input, options \\ []) do
    meta = metadata()

    Request.request_post(client, meta, "CreateCustomRoutingListener", input, options)
  end

  @doc """
  Create an endpoint group for the specified listener.

  An endpoint group is a collection of endpoints in one Amazon Web Services
  Region. A resource must be valid and active when you add it as an endpoint.
  """
  def create_endpoint_group(%Client{} = client, input, options \\ []) do
    meta = metadata()

    Request.request_post(client, meta, "CreateEndpointGroup", input, options)
  end

  @doc """
  Create a listener to process inbound connections from clients to an accelerator.

  Connections arrive to assigned static IP addresses on a port, port range, or
  list of port ranges that you specify.
  """
  def create_listener(%Client{} = client, input, options \\ []) do
    meta = metadata()

    Request.request_post(client, meta, "CreateListener", input, options)
  end

  @doc """
  Delete an accelerator.

  Before you can delete an accelerator, you must disable it and remove all
  dependent resources (listeners and endpoint groups). To disable the accelerator,
  update the accelerator to set `Enabled` to false.

  When you create an accelerator, by default, Global Accelerator provides you with
  a set of two static IP addresses. Alternatively, you can bring your own IP
  address ranges to Global Accelerator and assign IP addresses from those ranges.

  The IP addresses are assigned to your accelerator for as long as it exists, even
  if you disable the accelerator and it no longer accepts or routes traffic.
  However, when you *delete* an accelerator, you lose the static IP addresses that
  are assigned to the accelerator, so you can no longer route traffic by using
  them. As a best practice, ensure that you have permissions in place to avoid
  inadvertently deleting accelerators. You can use IAM policies with Global
  Accelerator to limit the users who have permissions to delete an accelerator.
  For more information, see [Identity and access management](https://docs.aws.amazon.com/global-accelerator/latest/dg/auth-and-access-control.html)
  in the *Global Accelerator Developer Guide*.
  """
  def delete_accelerator(%Client{} = client, input, options \\ []) do
    meta = metadata()

    Request.request_post(client, meta, "DeleteAccelerator", input, options)
  end

  @doc """
  Delete a custom routing accelerator.

  Before you can delete an accelerator, you must disable it and remove all
  dependent resources (listeners and endpoint groups). To disable the accelerator,
  update the accelerator to set `Enabled` to false.

  When you create a custom routing accelerator, by default, Global Accelerator
  provides you with a set of two static IP addresses.

  The IP addresses are assigned to your accelerator for as long as it exists, even
  if you disable the accelerator and it no longer accepts or routes traffic.
  However, when you *delete* an accelerator, you lose the static IP addresses that
  are assigned to the accelerator, so you can no longer route traffic by using
  them. As a best practice, ensure that you have permissions in place to avoid
  inadvertently deleting accelerators. You can use IAM policies with Global
  Accelerator to limit the users who have permissions to delete an accelerator.
  For more information, see [Identity and access management](https://docs.aws.amazon.com/global-accelerator/latest/dg/auth-and-access-control.html)
  in the *Global Accelerator Developer Guide*.
  """
  def delete_custom_routing_accelerator(%Client{} = client, input, options \\ []) do
    meta = metadata()

    Request.request_post(client, meta, "DeleteCustomRoutingAccelerator", input, options)
  end

  @doc """
  Delete an endpoint group from a listener for a custom routing accelerator.
  """
  def delete_custom_routing_endpoint_group(%Client{} = client, input, options \\ []) do
    meta = metadata()

    Request.request_post(client, meta, "DeleteCustomRoutingEndpointGroup", input, options)
  end

  @doc """
  Delete a listener for a custom routing accelerator.
  """
  def delete_custom_routing_listener(%Client{} = client, input, options \\ []) do
    meta = metadata()

    Request.request_post(client, meta, "DeleteCustomRoutingListener", input, options)
  end

  @doc """
  Delete an endpoint group from a listener.
  """
  def delete_endpoint_group(%Client{} = client, input, options \\ []) do
    meta = metadata()

    Request.request_post(client, meta, "DeleteEndpointGroup", input, options)
  end

  @doc """
  Delete a listener from an accelerator.
  """
  def delete_listener(%Client{} = client, input, options \\ []) do
    meta = metadata()

    Request.request_post(client, meta, "DeleteListener", input, options)
  end

  @doc """
  Specify the Amazon EC2 instance (destination) IP addresses and ports for a VPC
  subnet endpoint that cannot receive traffic for a custom routing accelerator.

  You can deny traffic to all destinations in the VPC endpoint, or deny traffic to
  a specified list of destination IP addresses and ports. Note that you cannot
  specify IP addresses or ports outside of the range that you configured for the
  endpoint group.

  After you make changes, you can verify that the updates are complete by checking
  the status of your accelerator: the status changes from IN_PROGRESS to DEPLOYED.
  """
  def deny_custom_routing_traffic(%Client{} = client, input, options \\ []) do
    meta = metadata()

    Request.request_post(client, meta, "DenyCustomRoutingTraffic", input, options)
  end

  @doc """
  Releases the specified address range that you provisioned to use with your
  Amazon Web Services resources through bring your own IP addresses (BYOIP) and
  deletes the corresponding address pool.

  Before you can release an address range, you must stop advertising it by using
  [WithdrawByoipCidr](https://docs.aws.amazon.com/global-accelerator/latest/api/WithdrawByoipCidr.html) and you must not have any accelerators that are using static IP addresses
  allocated from its address range.

  For more information, see [Bring your own IP addresses
  (BYOIP)](https://docs.aws.amazon.com/global-accelerator/latest/dg/using-byoip.html)
  in the *Global Accelerator Developer Guide*.
  """
  def deprovision_byoip_cidr(%Client{} = client, input, options \\ []) do
    meta = metadata()

    Request.request_post(client, meta, "DeprovisionByoipCidr", input, options)
  end

  @doc """
  Describe an accelerator.
  """
  def describe_accelerator(%Client{} = client, input, options \\ []) do
    meta = metadata()

    Request.request_post(client, meta, "DescribeAccelerator", input, options)
  end

  @doc """
  Describe the attributes of an accelerator.
  """
  def describe_accelerator_attributes(%Client{} = client, input, options \\ []) do
    meta = metadata()

    Request.request_post(client, meta, "DescribeAcceleratorAttributes", input, options)
  end

  @doc """
  Describe a custom routing accelerator.
  """
  def describe_custom_routing_accelerator(%Client{} = client, input, options \\ []) do
    meta = metadata()

    Request.request_post(client, meta, "DescribeCustomRoutingAccelerator", input, options)
  end

  @doc """
  Describe the attributes of a custom routing accelerator.
  """
  def describe_custom_routing_accelerator_attributes(%Client{} = client, input, options \\ []) do
    meta = metadata()

    Request.request_post(
      client,
      meta,
      "DescribeCustomRoutingAcceleratorAttributes",
      input,
      options
    )
  end

  @doc """
  Describe an endpoint group for a custom routing accelerator.
  """
  def describe_custom_routing_endpoint_group(%Client{} = client, input, options \\ []) do
    meta = metadata()

    Request.request_post(client, meta, "DescribeCustomRoutingEndpointGroup", input, options)
  end

  @doc """
  The description of a listener for a custom routing accelerator.
  """
  def describe_custom_routing_listener(%Client{} = client, input, options \\ []) do
    meta = metadata()

    Request.request_post(client, meta, "DescribeCustomRoutingListener", input, options)
  end

  @doc """
  Describe an endpoint group.
  """
  def describe_endpoint_group(%Client{} = client, input, options \\ []) do
    meta = metadata()

    Request.request_post(client, meta, "DescribeEndpointGroup", input, options)
  end

  @doc """
  Describe a listener.
  """
  def describe_listener(%Client{} = client, input, options \\ []) do
    meta = metadata()

    Request.request_post(client, meta, "DescribeListener", input, options)
  end

  @doc """
  List the accelerators for an Amazon Web Services account.
  """
  def list_accelerators(%Client{} = client, input, options \\ []) do
    meta = metadata()

    Request.request_post(client, meta, "ListAccelerators", input, options)
  end

  @doc """
  Lists the IP address ranges that were specified in calls to
  [ProvisionByoipCidr](https://docs.aws.amazon.com/global-accelerator/latest/api/ProvisionByoipCidr.html),
  including the current state and a history of state changes.
  """
  def list_byoip_cidrs(%Client{} = client, input, options \\ []) do
    meta = metadata()

    Request.request_post(client, meta, "ListByoipCidrs", input, options)
  end

  @doc """
  List the custom routing accelerators for an Amazon Web Services account.
  """
  def list_custom_routing_accelerators(%Client{} = client, input, options \\ []) do
    meta = metadata()

    Request.request_post(client, meta, "ListCustomRoutingAccelerators", input, options)
  end

  @doc """
  List the endpoint groups that are associated with a listener for a custom
  routing accelerator.
  """
  def list_custom_routing_endpoint_groups(%Client{} = client, input, options \\ []) do
    meta = metadata()

    Request.request_post(client, meta, "ListCustomRoutingEndpointGroups", input, options)
  end

  @doc """
  List the listeners for a custom routing accelerator.
  """
  def list_custom_routing_listeners(%Client{} = client, input, options \\ []) do
    meta = metadata()

    Request.request_post(client, meta, "ListCustomRoutingListeners", input, options)
  end

  @doc """
  Provides a complete mapping from the public accelerator IP address and port to
  destination EC2 instance IP addresses and ports in the virtual public cloud
  (VPC) subnet endpoint for a custom routing accelerator.

  For each subnet endpoint that you add, Global Accelerator creates a new static
  port mapping for the accelerator. The port mappings don't change after Global
  Accelerator generates them, so you can retrieve and cache the full mapping on
  your servers.

  If you remove a subnet from your accelerator, Global Accelerator removes
  (reclaims) the port mappings. If you add a subnet to your accelerator, Global
  Accelerator creates new port mappings (the existing ones don't change). If you
  add or remove EC2 instances in your subnet, the port mappings don't change,
  because the mappings are created when you add the subnet to Global Accelerator.

  The mappings also include a flag for each destination denoting which destination
  IP addresses and ports are allowed or denied traffic.
  """
  def list_custom_routing_port_mappings(%Client{} = client, input, options \\ []) do
    meta = metadata()

    Request.request_post(client, meta, "ListCustomRoutingPortMappings", input, options)
  end

  @doc """
  List the port mappings for a specific EC2 instance (destination) in a VPC subnet
  endpoint.

  The response is the mappings for one destination IP address. This is useful when
  your subnet endpoint has mappings that span multiple custom routing accelerators
  in your account, or for scenarios where you only want to list the port mappings
  for a specific destination instance.
  """
  def list_custom_routing_port_mappings_by_destination(%Client{} = client, input, options \\ []) do
    meta = metadata()

    Request.request_post(
      client,
      meta,
      "ListCustomRoutingPortMappingsByDestination",
      input,
      options
    )
  end

  @doc """
  List the endpoint groups that are associated with a listener.
  """
  def list_endpoint_groups(%Client{} = client, input, options \\ []) do
    meta = metadata()

    Request.request_post(client, meta, "ListEndpointGroups", input, options)
  end

  @doc """
  List the listeners for an accelerator.
  """
  def list_listeners(%Client{} = client, input, options \\ []) do
    meta = metadata()

    Request.request_post(client, meta, "ListListeners", input, options)
  end

  @doc """
  List all tags for an accelerator.

  For more information, see [Tagging in Global Accelerator](https://docs.aws.amazon.com/global-accelerator/latest/dg/tagging-in-global-accelerator.html)
  in the *Global Accelerator Developer Guide*.
  """
  def list_tags_for_resource(%Client{} = client, input, options \\ []) do
    meta = metadata()

    Request.request_post(client, meta, "ListTagsForResource", input, options)
  end

  @doc """
  Provisions an IP address range to use with your Amazon Web Services resources
  through bring your own IP addresses (BYOIP) and creates a corresponding address
  pool.

  After the address range is provisioned, it is ready to be advertised using [
  AdvertiseByoipCidr](https://docs.aws.amazon.com/global-accelerator/latest/api/AdvertiseByoipCidr.html).

  For more information, see [Bring your own IP addresses (BYOIP)](https://docs.aws.amazon.com/global-accelerator/latest/dg/using-byoip.html)
  in the *Global Accelerator Developer Guide*.
  """
  def provision_byoip_cidr(%Client{} = client, input, options \\ []) do
    meta = metadata()

    Request.request_post(client, meta, "ProvisionByoipCidr", input, options)
  end

  @doc """
  Remove endpoints from a custom routing accelerator.
  """
  def remove_custom_routing_endpoints(%Client{} = client, input, options \\ []) do
    meta = metadata()

    Request.request_post(client, meta, "RemoveCustomRoutingEndpoints", input, options)
  end

  @doc """
  Remove endpoints from an endpoint group.

  The `RemoveEndpoints` API operation is the recommended option for removing
  endpoints. The alternative is to remove endpoints by updating an endpoint group
  by using the
  [UpdateEndpointGroup](https://docs.aws.amazon.com/global-accelerator/latest/api/API_UpdateEndpointGroup.html)
  API operation. There are two advantages to using `AddEndpoints` to remove
  endpoints instead:

    * It's more convenient, because you only need to specify the
  endpoints that you want to remove. With the `UpdateEndpointGroup` API operation,
  you must specify all of the endpoints in the endpoint group except the ones that
  you want to remove from the group.

    * It's faster, because Global Accelerator doesn't need to resolve
  any endpoints. With the `UpdateEndpointGroup` API operation, Global Accelerator
  must resolve all of the endpoints that remain in the group.
  """
  def remove_endpoints(%Client{} = client, input, options \\ []) do
    meta = metadata()

    Request.request_post(client, meta, "RemoveEndpoints", input, options)
  end

  @doc """
  Add tags to an accelerator resource.

  For more information, see [Tagging in Global Accelerator](https://docs.aws.amazon.com/global-accelerator/latest/dg/tagging-in-global-accelerator.html)
  in the *Global Accelerator Developer Guide*.
  """
  def tag_resource(%Client{} = client, input, options \\ []) do
    meta = metadata()

    Request.request_post(client, meta, "TagResource", input, options)
  end

  @doc """
  Remove tags from a Global Accelerator resource.

  When you specify a tag key, the action removes both that key and its associated
  value. The operation succeeds even if you attempt to remove tags from an
  accelerator that was already removed.

  For more information, see [Tagging in Global Accelerator](https://docs.aws.amazon.com/global-accelerator/latest/dg/tagging-in-global-accelerator.html)
  in the *Global Accelerator Developer Guide*.
  """
  def untag_resource(%Client{} = client, input, options \\ []) do
    meta = metadata()

    Request.request_post(client, meta, "UntagResource", input, options)
  end

  @doc """
  Update an accelerator.

  Global Accelerator is a global service that supports endpoints in multiple
  Amazon Web Services Regions but you must specify the US West (Oregon) Region to
  create, update, or otherwise work with accelerators. That is, for example,
  specify `--region us-west-2` on AWS CLI commands.
  """
  def update_accelerator(%Client{} = client, input, options \\ []) do
    meta = metadata()

    Request.request_post(client, meta, "UpdateAccelerator", input, options)
  end

  @doc """
  Update the attributes for an accelerator.
  """
  def update_accelerator_attributes(%Client{} = client, input, options \\ []) do
    meta = metadata()

    Request.request_post(client, meta, "UpdateAcceleratorAttributes", input, options)
  end

  @doc """
  Update a custom routing accelerator.
  """
  def update_custom_routing_accelerator(%Client{} = client, input, options \\ []) do
    meta = metadata()

    Request.request_post(client, meta, "UpdateCustomRoutingAccelerator", input, options)
  end

  @doc """
  Update the attributes for a custom routing accelerator.
  """
  def update_custom_routing_accelerator_attributes(%Client{} = client, input, options \\ []) do
    meta = metadata()

    Request.request_post(client, meta, "UpdateCustomRoutingAcceleratorAttributes", input, options)
  end

  @doc """
  Update a listener for a custom routing accelerator.
  """
  def update_custom_routing_listener(%Client{} = client, input, options \\ []) do
    meta = metadata()

    Request.request_post(client, meta, "UpdateCustomRoutingListener", input, options)
  end

  @doc """
  Update an endpoint group.

  A resource must be valid and active when you add it as an endpoint.
  """
  def update_endpoint_group(%Client{} = client, input, options \\ []) do
    meta = metadata()

    Request.request_post(client, meta, "UpdateEndpointGroup", input, options)
  end

  @doc """
  Update a listener.
  """
  def update_listener(%Client{} = client, input, options \\ []) do
    meta = metadata()

    Request.request_post(client, meta, "UpdateListener", input, options)
  end

  @doc """
  Stops advertising an address range that is provisioned as an address pool.

  You can perform this operation at most once every 10 seconds, even if you
  specify different address ranges each time.

  It can take a few minutes before traffic to the specified addresses stops
  routing to Amazon Web Services because of propagation delays.

  For more information, see [Bring your own IP addresses (BYOIP)](https://docs.aws.amazon.com/global-accelerator/latest/dg/using-byoip.html)
  in the *Global Accelerator Developer Guide*.
  """
  def withdraw_byoip_cidr(%Client{} = client, input, options \\ []) do
    meta = metadata()

    Request.request_post(client, meta, "WithdrawByoipCidr", input, options)
  end
end